Record Details

Thermal insulation values of wool and acrylic blankets before and after laundering

ScholarsArchive at Oregon State University

Field Value
Title Thermal insulation values of wool and acrylic blankets before and after laundering
Names Rohde, Rosalyn Opal (creator)
Carlson, Elaine K. (advisor)
Date Issued 1963-06-14 (iso8601)
Note Graduation date: 1965
Abstract Twelve Acrilan acrylic, twelve Orlon acrylic, and twelve wool
blankets were studied to determine the effect of laundering on thermal
insulation value. The thirty-six blankets used in this study
were selected and purchased by Florence Petzel for use in the study
of the effects of maintenance on wool and acrylic blankets.
Specified sections of each of the blankets were laundered zero,
one, five or ten times using a soak wash method. Cutting diagrams
were then developed for each blanket section. Seven hundred twenty
warmth tests specimens, each measuring five inches square, were
prepared at the time of Petzel's study. They were kept under constant
temperature before the testing began and throughout the
testing procedures. The laboratory tests included a thickness reading
on the Compressometer and a warmth determination using the
Cenco-Fitch instrument.
The data from the warmth study is discussed in two parts.
The thickness measurements and thermal conductivity values for
each laundry interval are noted first. This is followed by a discussion
of the significance of the relationship of thickness to
warmth. The findings show a loss in the thickness of the Orlon
acrylic and Acrilan acrylic blankets during laundering caused by
matting and/or a loss of fibers. Conversely, the wool blankets
gained continuously in thickness due to shrinkage. The thickest
blankets had the lowest thermal conductivity values and were the
best insulators; the thinnest blankets had the largest thermal conductivity
values and had the least insulation value. This emphasizes
the importance of the retention of thickness for the maintenance of
warmth.
There was not a significant difference in the amount of heat
that was transmitted by the Orlon acrylic, Acrilan acrylic or wool
blankets. This implies that warmth is dependent upon the thickness
of a blanket and the retention of that thickness rather than upon the
fiber content. An increase in insulation value was generally followed
by a decrease in insulation value if the blanket lost thickness.
The insulation value improved if the blanket shrank and became
more compact. However, there is a point at which compactness
is detrimental to warmth because of the reduction of vital air
spaces. It was concluded that the warmth of a blanket is controlled
by the thickness of the blanket and its ability to retain that thickness
with laundering. It was further concluded that a thickness reading
which is interpreted along with data on dimensional stability, yarn
count, weight, and breaking strength would be sufficient to predict
warmth for consumer purposes and information. It was recommended
that subjective testing with individuals be included in future evaluations
for more meaningful information. The best guide for the
selection of a blanket still appears to be the brand name of a reputable
manufacturer and a business firm to which the blanket may be
returned if its performance is not satisfactory. One could expect
to find warm blankets made from any fiber material provided
the blanket is suitably woven and sufficiently thick.
Genre Thesis/Dissertation
Topic Orlon
Identifier http://hdl.handle.net/1957/48150

© Western Waters Digital Library - GWLA member projects - Designed by the J. Willard Marriott Library - Hosted by Oregon State University Libraries and Press