Record Details

Conserving energy by environmentally acceptable practices in maintaining and procuring transmission poles for long service ; August 1992

ScholarsArchive at Oregon State University

Field Value
Title Conserving energy by environmentally acceptable practices in maintaining and procuring transmission poles for long service ; August 1992
Names Morrell, Jeffrey J. (creator)
Corden, M. E. (Malcolm E.) (creator)
Oregon State University. Dept. of Forest Products (creator)
Date Issued 1992 (iso8601)
Abstract Evaluation of previously established
field trials of remedial internal treatments
demonstrates the continued performance of
chioropicrin, Vorlex, and
methylisothiocyanate (MITC). While the
degree of protection afforded by these
treatments has declined with time, residual
fungitoxic levels remain in many tests.
Field trials of gelatin encapsulated MITC
indicate that gelatin had no negative effect
on fumigant performance even when no
water was added at the time of treatment.
Closed tube bioassays, chemical
analyses, and culturing of Douglas-fir and
southern pine poles treated with glass
encapsulated METC (MITC-Fume) indicate
that this chemical is outperforming
metham sodium 3 years after application.
While the glass vials lost chemical very
slowly, the slow release rate did not
appear to adversely affect MITC
performance.
Trials to evaluate the performance
of fused borate rods were sampled after 1
or 2 years of exposure. Chemical analysis
of cores removed from the test poles
revealed that none of the treatments
contained boron at levels which would be
considered adequate for arresting or
preventing colonization by wood decay
fungi. Interestingly, boron levels in poles
exposed in Hilo, Hawaii were highest
above the treatment hole, suggesting that
some upward diffusion of this chemical is
possible. The low boron levels in these
poles are reason for concern, since a
number of utilities are considering the
using this formulation for remedial
treatment at the groundline.
Evaluations of new solid fumigants
are progressing. Trials with Basamid
indicate that the addition of copper
compounds improved the rate of
decomposition to produce MITC.
Simultaneous addition of copper sulfate
and Basamid may be useful for
accelerating the decomposition of this
compound, making it practical for control
of internal decay fungi.
Trials have been established to
evaluate the performance of gelled and
pelletized metham sodium and a sodium
fluoride/boron rod. These trials will be
evaluated in future reports. A third field
trial to evaluate the performance of a
copper naphthenate/boron paste for
internal treatment of Douglas-fir poles is
currently be evaluated to determine
chemical levels 3 years after treatment.
The performance of gelled metham
sodium was further evaluated under
laboratory conditions to better understand
the performance of this chemical. Gelled
metham sodium provided improved fungal
control in comparison with liquid metham
sodium and appeared to produce increased
MITC levels under a variety of test
conditions. The improved performance of
this formulation may reflect the ability of
the gell to retain moisture for longer
periods of time than the liquid metham
sodium formulation. Further studies of
this formulation are underway.
Laboratory studies were also
performed to evaluate the effects of
various additives on the performance of
Basamid. Once again, the addition of
copper compounds enhanced the
production of MITC. A number of other
compounds shifted decomposition to the
production of carbon disulfide and
carbonyl sulfide, two less fungitoxic
compounds. Further studies are underway
to identify non-sulfur products which may
provide some protection against wood
decay fungi.
Evaluations of the effects of
artificial voids on performance of
fumigants in Douglas-fir poles indicate that
voids had little or no effect on fumigant
distribution. As a result, fumigant
treatment of solid wood around voids
represents a viable strategy for improving
pole service life.
Evaluation of timbers treated with
metham sodium indicate that detectable
levels of MITC were present one year
after treatment. These timbers will be
evaluated in subsequent years to determine
the protective period provided by
fumigants in sawn material.
We continue development of a
fumigant movement model using data
previously developed on MITC. This
year, we evaluated a previously developed
system, ANSYS. Results of preliminary
trials are similar to data previously
developed on MITC-Fume treated poles
and indicate that modeling MITC
movement should be possible. Further
trials are underway to confirm and expand
this model.
The effect of wood moisture
content, temperature and wood species on
metham sodium decomposition was
investigated under laboratory conditions.
The efficiency of dcomposition to MITC
varied widely, but was most affected by
temperature and wood moisture content.
The results suggests that there is
considerable potential for improving
decomposition efficiency to enhance
performance of this fumigant. Further
studies to characterize the relationship
between chemical content of the wood
species and decomposition are underway.
Field trials to identify safer
treatments for preventing decay of cedar
sapwood and protecting field drilled bolt
holes are continuing. Diffusible treatments
continue to provide excellent protection for
field drilled bolt holes.
A study to develop estimates of the
extent of decay above the groundline in
Douglas-fir poles in the Pacific Northwest
is underway. The data from this study
will be used to develop estimates of the
potential for damage and provide some
insight into the extent of this problem.
Studies to develop guidelines for
sterilization of Douglas-fir poles following
air-seasoning are continuing. Evaluations
of internal temperature development during
kiln-drying were completed this year and
indicate that internal temperatures during
typical pole drying schedules were more
than adequate for acheiving sterilization.
Further evaluations of the data are
underway to develop reliable heating
curves for this process.
Evaluations of groundline
preservative systems have been established
at Corvallis, OR and Merced, CA. The
results indicate that all of the formulations
are moving well through the wood in a
manner similar to that found with
pentachlorophenol-based systems.
Chemical levels in some treatments;
however, are beginning to decline 30
months after treatment. Studies are now
underway to establish thresholds for
combinations of the various formulations.
Copper naphthenate treated western
redcedar stakelets continue to perform well
in fungus cellar trials. Stakes weathered
prior to treatment are degrading slightly
faster, while freshly sawn stakelets
continue to perform well. Field trials have
also been established to evaluate the
performance of copper naphthenate treated
Douglas-fir utility poles in California and
Oregon. The chemical levels and fungal
colonization will be monitored in these
poles to provide a guide to performance of
this chemical in western wood species.
Genre Technical Report
Topic Wood poles -- Fumigation
Identifier http://hdl.handle.net/1957/9436

© Western Waters Digital Library - GWLA member projects - Designed by the J. Willard Marriott Library - Hosted by Oregon State University Libraries and Press